One of the most important Ore Milling Equipment mechanical machines that are used in the mining machinery industry is crushing machine. Because the ore milling equipment realizes materials crushing by means of huge impact force, in the whole crushing process, the machine is especially damaged. In order to minimize the abrasion of the ore milling equipment, regular lubrication to the ore milling equipment is very necessary.
A good lubrication system is an effective way to reduce friction but also to extend the life of cone ore milling equipment. However, it needs tricks adding lubricant on the machine, because of improper lubrication will not reduce the ore milling equipment abrasion, but will damage the machine. So how should the customers add lubricant to the ore milling equipment in the most appropriate way? Now, the experts of will explain the methods of making ration use of ore milling equipment lubricant.
The lubrication of crushing machine should always be paid attention to that the lubricant should not be added too much one time, but not too little either. If there is too much lubricant on the machine, the driving force produced by the motor will not be able to be transmitted to the crushing part of the ore milling equipment in the best way. However, this part of driving force will have an influence on the lubricant and make it warm. This part of heat will accumulate in the machine and cause damage to the machine. On the contrary, if there is too little lubricant inside the machine, the internal part of the machine will be damaged because of the mutual friction of the spare parts.